47
Tuning into a station
Manual setting of stations
If you know the frequency of the stations in your environment, you can also set
the stations manually.
1. Press the Menu button on the remote control.
E The menu of the IVTV-05 is displayed.
2. Move the selection mark with the M or N button to the Setup menu item and press
the OK button.
E The Setup menu is displayed, the Channels installation entry is selected.
3. Press the OK button.
E The Station Channels installation menu is displayed.
4. Press the O or P button repeatedly until Manual is displayed.
5. Move the selection mark with the M or N button to the Channel number entry.
6. Use the keys of the numeric keypad to enter the channel number of the desired
station.
7. Press the OK button.
E If a station can be received at the channel number, the signal strength (level) and
the signal quality are displayed on the lower lines.
8. Press the OK button.
E The station is stored.
9. Press the Menu button to return to the menu. Press the button again to exit
the menu.
To Next Page
Loading...