48
DEUTSCH
FRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
DANSK
ENGLISH
Tuning into a station
Refreshing the station list
You can refresh the current station list by adding newly broadcasting stations
since the time you created your station list.
1. Press the Menu button on the remote control.
E The menu of the IVTV-05 is displayed.
2. Move the selection mark with the M or N button to the Setup menu item and press
the OK button.
E The Station Channels installation entry is selected.
3. Press the OK button.
E The Station Channels installation menu is displayed.
4. Press the O or P button repeatedly until Update is displayed.
5. Press the OK button.
E If you pressed OK, the scanning for new stations starts. After the scanning is complete,
the number of new stations is displayed.
6. Press the OK button.
E The menu is displayed again.
7. Press the Menu button to return to the menu. Press the button again to exit the
menu.
To Next Page
Loading...