45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
SPECIFICATIONS
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio
sources can, for example, be portable
CD players, MiniDisc players or MP3
players.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Note:
● If no CD changer is connected,
the AUX input must be activated in
the menu.
Switching the AUX input on/off
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “AUX OFF” or “AUX
ON” appears in the display.
➮ Press the or button 7 to
switch AUX on/off.
When you have finished adjusting the
setting,
➮ press the MENU button 8.
Note:
● If the AUX input is activated, you
can select it by pressing the SRC
button 2. “AUX INPUT” then ap-
pears in the display.
Specifications
Amplifier
Output power: 4 x 25 watts sine
in accordance with
DIN 45 324
at 14.4 V
4 x 45 watts max.
power
Tuner
Wavebands in Europe:
FM : 87.5 - 108 MHz
MW : 531 - 1 602 kHz
LW : 153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels: 2 V
Input sensitivity
AUX input: 2 V / 6 kΩ
Weight: 1.33 kg
Subject to changes!
EXTERNAL AUDIO SOURCES
02Kiel_MalagaCD36 gb 15.02.2006, 11:59 Uhr45
To Next Page
Loading...
