40
Adjusting the display
You can adjust the display to suit the installa-
tion position in your vehicle and your own pref-
erences.
Adjusting the viewing angle
➮ Press the MENU button 8.
➮ Keep pressing the or button 7 un-
til “ANGLE” appears in the display.
➮ Adjust the viewing angle using the
and buttons 7.
To close the menu,
➮ press the OK button 5 or MENU but-
ton 8.
The settings are saved.
Adjusting the display brightness
If your car radio has been fitted as described
in the installation instructions, the display
brightness will switch over when the head-
lights are turned on/off. The display bright-
ness can be adjusted separately for night and
day in steps ranging from 1-9.
Daytime display brightness
➮ Press the MENU button 8.
➮ Keep pressing the or button 7 un-
til “DIM DAY” appears in the display.
➮ Set the brightness using the and
buttons 7.
To close the menu,
➮ press the OK button 5 or MENU but-
ton 8.
The settings are saved.
Night-time display brightness
➮ Press the MENU button 8.
➮ Keep pressing the or button 7 un-
til “DIM NGHT” appears in the display.
➮ Set the brightness using the and
buttons 7.
To close the menu,
➮ press the OK button 5 or MENU but-
ton 8.
The settings are saved.
DISPLAY
To Next Page
Loading...
