51
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
DANSK
directory D02 will be skipped and D03
will be played. The display will then au-
tomatically switch from “D02” to “D03”.
Selecting tracks
To move up or down to another track in the
current directory,
➮ keep pressing the or button 7 un-
til the number of the required track ap-
pears in the display.
If the
button 7 is pressed once, the cur-
rent track will be played again from the be-
ginning.
Fast track selection
Fast track selection allows you to quickly se-
lect tracks in large directories. Fast track se-
lection selects tracks in steps of ten.
To quickly select tracks backwards or for-
wards,
➮ keep one of the buttons 7
pressed until fast-reverse / fast-forward
track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮ keep one of the / buttons 7
pressed until fast searching backwards /
forwards begins.
Random track play (MIX)
➮ Press the softkey 4 that corresponds
to the “MIX” display item.
“MIX CD” appears briefly in the display. The
next track to be played will be picked at ran-
dom.
Stopping MIX
➮ Press the softkey 4 that corresponds
to the “MIX” display item again.
“MIX OFF” appears briefly in the display and
the unit plays track 1 in the current directory.
Scanning tracks (SCAN)
You can briefly play all the tracks on the CD.
➮ Press the softkey 4 that corresponds
to the “SCA” display item.
“SCAN” appears in the display. The tracks on
the CD are briefly played in ascending order.
Note:
● You can set the scanning time. For fur-
ther details, please read the section en-
titled “Setting the scantime” in the “Ra-
dio mode” chapter.
Stopping SCAN and continuing playback
➮ Press the softkey 4 that corresponds
to the “SCA” display item again.
The currently scanned track will then contin-
ue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
➮ Press the softkey 4 that corresponds
to the “RPT” display item.
“RPT TRCK” appears briefly in the display.
To repeat the whole directory,
➮ press the softkey 4 that corresponds
to the “RPT” display item again.
“RPT DIR” appears briefly in the display.
Cancelling REPEAT
To stop the current track or current directory
from being repeated,
➮ keep pressing the softkey 4 that corre-
sponds to the “RPT” display item until
“RPT OFF” appears briefly in the dis-
play.
MP3 MODE
To Next Page
Loading...
