46
Adjusting the volume for traffic
announcements and the warning
beep
Although this volume was preset at the fac-
tory, you can use the DSC function to alter
the setting (see “DSC programming - TA
VOL”).
Switching the warning beep off
a) Tune into another station offering traf-
fic information:
• Press the rocker switch or
• press a preset button which has a
traffic programme station allocated
to it.
Alternatively:
b) Switch off the priority for traffic an-
nouncements:
• Press TA.
“A” will disappear from the display.
Automatic seek tuning start
(CD operation)
If you leave the reception area for the traffic
programme station you have tuned into while
you are listening to a CD, the system will
automatically start searching for a new TA
programme.
If no such station is found within approxi-
mately 30 seconds, a warning beep will
sound every 30 seconds. To switch the
warning beep off, proceed as described
above.
To Next Page
Loading...
