52
Assistance in setting your equaliser
Start to make your settings in the mid-range/treble and end it with the bass range.
What to do
Boost the basses with
the “LOW EQ” filter
Frequency: 50 to 100 Hz
Level: +4 to +6 dB
Reduce the lower mid-range
with the “LOW EQ” filter
Frequency: 125 to 400 Hz
Level: approx. -4 dB
Reduce the mid-range with
“HIGH EQ” filter
Frequency: 1 000 to 2 500 Hz
Level: -4 to -6 dB
Boost treble range with
“HIGH EQ” filter
Frequency: approx. 10 kHz
Level: +2 to +4 dB
Notes
Avoid distortion.
Boost the level carefully if
the speaker diameter is
too small.
The tone may become too lean
and aggressive.
Pay attention to the underlying
tone of the music
Playback should not be too
quiet.
Tone too powerless.
Avoid a piercing type of tone.
Strong hissing sound unpleas-
ant.
Sound impression / Problem
Bass reproduction too weak
Unclear bass
Playback reverberates
Unpleasant pressure
on the ears
Sound appears to be too
much in the foreground,
very aggressive, no stereo effect
Lifeless reproduction
Lack of transparency
Instruments do not sparkle
Frequency range
Bass
30 – 100 Hz
Lower mid-range
100 – 400 Hz
Mid-range sound
400 – 4 000 Hz
Treble
4 000 – 20 000 Hz
To Next Page
Loading...
Need help?
General
