35
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Setting the Balance (left/right) and
the fader (front/rear).
Press AUD twice.
Fader front
Fader rear
Balance left
Balance right
The settings selected will appear in the
display. The last setting will be stored
automatically.
Switching AUD off:
Press the button once again briefly.
If no changes are made within 8 sec-
onds, the AUD mode will switch off au-
tomatically.
Extra EQU ON/OFF function
Switching the equaliser on/off:
Press AUD for approximately 2 sec-
onds. “EQU ON” or “EQU OFF” will ap-
pear briefly in the display.
@ DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See the section on “DSC pro-
gramming” for more information.
A AUD
Adjusts the treble and bass frequen-
cies.
Different settings can be stored for FM,
AM and CD.
To store the settings:
Select the operating mode.
Press AUD once and use the rocker
switch to adjust the settings.
Treble +
Treble –
Bass –
Bass +
Select the next operating mode and
adjust the settings as desired.
To Next Page
Loading...
Need help?
General
