Bluetooth mode
Bluetooth mode
The Bluetooth• function allows registering cell phones
and media playback devices
with
the New
York.
When you register a cell phone with the New
York,
you
can make phone calls
with
the
built-in hands-free func-
tion.
You
can access the lists
of
dialled numbers and the
phone
book
of
the
registered cell phone.
If
the connected Bluetooth• device supports the func-
tions A2DP and
AVRCP,
you
can
play the music via the
New
York
unit
and control the playback. During a call, the
music playback is interrupted and continued again after
the
call.
If
a cell phone is registered via Bluetooth• and a call is re-
ceived during
the
playback
of
another source,
the
source
playback is interrupted and
the
call menu is displayed.
Starting Bluetooth mode
..-
In the main menu, press
on
Bluetooth.
-Or-
..-
Press
the
MENU
button
2) for approx. 2 seconds.
(Prerequisite: This function
is
assigned
to
the
button
in the settings menu.)
The Bluetooth• menu
is
displayed.
It
contains
the
list
of
known Bluetooth• devices. Other audio sources
are switched off.
[
'L
] Change
to
next higher level.
[ + ] Move selection mark.
[ • ] Move selection mark.
[
..
•1
Disconnect connection
to
marked device.
[ X 1 Delete marked device from
the
list.
[
II
1 Display options menu.
..-
Double-dick on the name
of
the
Bluetooth• device
with
which you
want
to
establish a connection.
When
the
device
is
in range, the connection
is
estab-
lished and
the
menu for
the
device is displayed.
38 1
Registering Bluetooth devices
If
you
want
to
register a device
with
the New York for the
first time, proceed
as
follows:
..-
Ensure
that
Bluetooth• is activated at
the
New York
and at your Bluetooth• device.
..-
In the options menu of
the
Bluetooth• mode, enter a
pairing code
(see
Bluetooth" settings).
..-
Search for new devices/connections on your Blue-
tooth
• device.
..-
The New York appears
as
"New York" in the list
of
Bluetooth• devices.
..-
Establish
the
connection; you may have
to
enter the
pairing code
that
was previously defined on the New
York.
The connection
is
being established and the menu
for the registered device is displayed.
Note:
If
a telephone
is
connected with
the
New
York
unit,
the Bluetooth• icon
:t
is
displayed at the
top
right
edge
of
the
display in all audio/video sources.
Telephone
mode-
Bluetooth
If
you registered a phone
with
the New York via Blue-
tooth
•, the following menu appears.
[
'L
1 Change
to
next higher level.
[ + 1 Move selection mark.
[ • 1 Move selection mark.
[
...
1 Disconnect connection
with
current device.
[
:!5
1 Display keypad
to
directly enter a phone
number
[
11
] Display options
menu
.
..-
Select a contact/number via the call lists or the phone
book and double the
entry
twice (double-dick).
The
connection is being established.
To Next Page
Loading...
