The options menu
is
displayed, the current setting
is
shown after
RDS.
.-
In the options menu, press
the
R
DS
button
to
change
the setting.
.-
Press
the
[ X 1 button.
The radio menu
is
displayed again.
Switching
RDS
time signal on/
off
Th
e time
can
be synchronised with
the
time
data trans-
mi
tted
via
RDS.
.-
In the radio menu, press the [
9]
button.
.-
In the options menu, press the
RDS
Clock Ti
me
but-
ton
to
change the setting.
.-
Pr
ess
the
[ X ] button.
The radio menu
is
displayed again.
Optimising radio
rece
pti
on
The HI
CUT
function
causes
a reception improvement in
case
of
poor
radio reception (in
FM
radio mode only).
If
reception interferences exist, the interference level
is
au
-
tomatically decreased.
.-
In the radio menu, press
the
[ 9 1
button.
.-
In the options menu, press
the
HI
CUT
button
to
change
the
setting.
.-
Press
the
[ X 1 button.
The radio menu is displayed again.
Switchi
ng
the
REG
func
ti
on (re
gi
onal
programmes) on/
off
Some
RDS
stations divide their programmes
into
region-
al
programmes
with
different contents
at
certain times.
If
the
REG
function
is
activated, the car sound system
changes
only
to
those alternate frequencies
of
the set
station on which the same regional programme is being
broadcast.
..-
In
the
radio menu, press the R
EG
button
to
switch
the
REG
function on
or
off.
The REG
button
is
illuminated
if
the
REG
function is
switched on.
Ra
d
io
mode
Switching the
AF
(alternative frequencies)
function on/
off
If
the
AF
function
is
activated,
the
car sound system auto-
matically tunes into
the
best receivable frequency for the
station
that
is
currently set.
..-
In
the radio menu, press the
AF
button
to
switch the
AF
function on or off.
The
AF
button
is illuminated
if
the
AF
function
is
switched on.
Adjusting the seek
tun
ing sensitiv
it
y
The
seek
tuning
sensitivity decides whether the
auto
-
matic station
seek
tuning
finds only strong stations
or
also weaker stations
that
may be noisy.
..-
In the radio menu, press the Loc button
to
set the
sensitivity
of
the station seek tuning.
If
the Loc button
is
illuminated, the seek
tuning
lo
-
cates
only
strong stations.
Traffic information
In the reception region Europe, an
FM
station
can
iden-
tify traffic announcements via an
RDS
signal.
If
priority for
traffic reports
is
switched on, a traffic report
is
automati-
cally switched through, even
if
the
car sound system
is
currently
not
in radio
mode
.
Note
:
The
volume is increased for the duration
of
the
switched-throu
gh
traffic announcement.
You
can
ad-
just
the
mini mum volume for traffic announcements.
S
wi
tching
pr
io
r
ity
for
traffic
announcem
e
nts
on
/
off
..-
In
the radio menu, press the
TA
button
to
switch the
priority for traffic announcements
on
or
off
.
The
TA
button
is
illuminated
if
the
priority for traffic
announcements is switched on.
S
etti
ng
the
minimum
volume
f
or
t
raffi
c
a
nn
oun
cement
s
..-
In
the radio menu, press
the
[ D 1 button.
..-
In
the options menu, press
the
TA
VOL button.
..-
Adjust the desired volume
with
the [
~
]
or [
..,.
]
but
-
ton.
..-
Press
the
[ X 1 button.
The
radio menu is displayed again, the set volume
is
stored.
I 29
To Next Page
Loading...
