Radio
mode
Radio mode
Start radio mode
..-
In
the
main menu, press
the
Radio
button.
The radio
menu
is displayed.
Select memory bank
Different
memory
banks and wavebands are available.
Up
to
6 stations can be stored in each memory bank.
..-
Press
the [
~]
button
repeatedly until the desired
memory
bank
is
displayed.
Tuning into a station
Tuning into stations manually
..-
Briefly press the [ + J
or
[ + 1
button
once
or
sev-
eral times
to
change the frequency in increments.
Enter broadcast frequency directly
If
the
frequency
of
the desired stations
is
known,
it
can
be entered directly via the touchscreen.
..-
In radio mode, press the
[::51
button.
A numeric keypad
is
displayed for the frequency
input.
..-
Enter the frequency
of
the
desired station
with
the
numeric keypad.
..-
Press
the
( v 1
button.
The radio menu
is
displayed,
the
station
of
the
frequency entered
is
played back.
Starting station
seek
tuning
..-
Press
the
[ + 1
or
( + 1
button
for approx. 2 seconds
to
start station
seek
tuning.
The radio tunes
into
the next receivable station.
Note:
For the reception
area
Europe: In the
FM
waveband,
only
traffic information stations are tuned into
if
the
priority for traffic information
is
switched on.
2s
I
Storing
stations
manually
..-
Select the desired
memory
bank
with
the [
~
1 but-
ton .
..-
Set the desired station.
..-
Press
the
[ • • ]
button.
The menu for storing stations
is
displayed. 6 memory
locations are available
that
are displayed
as
buttons .
..-
Press
the
button
under which you
want
to
store
the
current station.
The station
is
stored, the radio menu
is
displayed
again.
Storing stations automatically
(Travel
store)
With Travelstore, you can automatically search for and
store the 6
FM
stations offering the strongest reception
in the region in
the
memory bank
FMl,
FM2
or
FM3.
..-
Select an
FM
memory bank.
..-
In
the
radio menu, press
the
[
11)
1
button.
..-
In
the
options menu, press
the
Travelstore
button
.
The
tuner
starts
the
automatic station seek tuning.
After the storing
is
completed, the radio plays
the
station at memory location 1
of
the previously se-
lected memory bank.
Note:
For
the
reception
area
Europe: With switched-on pri-
ority
for
traffic information, only traffic information
stations are stored.
Scanning
stations
You
can use the
scan
function
to
play all
the
receivable
stations
of
the
current waveband for a few seconds.
..-
In radio mode, press the [
,-]
button.
The seek
tuning
searches for stations in the current
waveband.
Each
receivable station
is
played for a few
seconds in
the
process .
..-
Pressing the
[,-]button
again selects
the
currently
scanned station and plays
it
back.
Switching
RDS
on/off
Many
FM
stations broadcast an
RDS
(Radio Data System)
signal in addition
to
their
programme in the reception
area
Europe
that
allows additional functions, such
as
the
display
of
the station name.
..-
In
the
radio menu, press the [
G)
button.
To Next Page
Loading...
