21
ENGLISH
Making settings in the "VARIOUS"
menu
SCAN TIME
Setting the scan time in 5-second increments.
Settings: 5 – 30.
쏅 Press the
button
7
to open the submenu.
쏅 Turn the volume control
4
to perform the
setting.
BROWSE
Switching fast track selection in browse mode on
or o using the volume control
4
. Settings: ON,
OFF.
쏅 Press the
button
7
to open the submenu.
쏅 Turn the volume control
4
to perform the
setting.
SEC CODE
Switching the code query on or o . Settings: ON,
OFF.
쏅 Press the
button
7
to open the submenu.
쏅 Turn the volume control
4
to perform the
setting.
CODE SET
The default setting of the code number is "0000".
This code number can be changed.
쏅 Press the
button
7
to open the entry
menu.
The display shows the currently stored code
number:
쏅 Turn the volume control
4
to select a digit
for the respective position.
쏅 Press the
or button
7
to reach the next
or previous position.
Note:
While entering the code number, you cannot
change the volume of the car sound system.
NORMSET
Restoring the original factory settings of the car
sound system.
쏅 Press the
button
7
to open the submenu.
쏅 Press the
button
7
to con rm restoring
the factory settings.
The car sound system switches o and is reset
to the factory settings.
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
AREA EUROPE
FM1 / FM2 / FMT ON
MW* OFF
LW* OFF
AM** / AMT** OFF
SW OFF
RDS ON
REGIONAL* OFF
TRAFFIC* OFF
SEEK SENS HI6
PTY OFF
ON VOLUME 30
LAST VOL ON
TA VOLUME* 30
TEL VOL*** 30
BEEP ON
BROWSE ON
SCAN 10
SCROLL X1
SEC CODE OFF
* Only in reception area "EUROPE"
** Only in reception areas "USA", "S-AMERICA"
and "THAILAND"
*** Professional only
User settings | Factory settings
To Next Page
Loading...
