8
Radio mode
Starting station seek tuning
쏅 Press the
/ button
7
to start station
seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation (
) is switched on.
• For the reception areas "EUROPE" and
"USA": In the FM waveband, the next
station with the currently selected pro-
gramme type is tuned into if the PTY func-
tion is activated (see the chapter "PTY").
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SEEK SENS").
Storing stations or calling stored
stations
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press a station button
;
for approx. 2 sec-
onds to store the current station under the
button.
- or -
쏅 Brie y press a station button
;
to call up the
stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
쏅 Press the MENU button
<
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅 Brie y press the MENU button
<
to con-
tinue listening to the station that is currently
being received.
Storing stations automatically
(Travelstore)
Travelstore allows automatically scanning the
3strongest FM stations of the region (Professional)
or the 6strongest FM stations of the Region (Basic)
and storing them in the FMT memory bank. Any
previously stored stations in this memory bank are
deleted in the process.
In the reception areas "USA", "S-AMERICA" and
"THAILAND", you can also store 3 or 6AM stations
in the AMT memory bank.
쏅 Select a memory bank of the desired wave-
band, e. g. FM1 or AM.
쏅 Press the SRC button
1
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for tra c information is switched
on ( ), only tra c information stations
are stored.
• If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "TUN BAND"), it is au-
tomatically reactivated if you initiate the
Travelstore function.
To Next Page
Loading...
