Blaupunkt SAN ANDREAS 970 - System Settings and Configuration; AUX Connection; General Settings; Advance Settings

AUX
Connect an external audio source using a 3.5mm
stereo AUX cable.
Settings
General Settings
1. Touch to select the time zone in the region the
device is being used in
2. Touch to set date, touch OK once settings are done
3. Select option for 24H mode;
4. Select Auto Adjust mode to automatically allow
device to set time using GPS provided information
Select Auto Launch for Android Auto (Android
auto projection mode is active)
5. Enter advance settings
6. Select Rear View Camera Delay mode
7. Select option to delay device Turn OFF in case of
connecting an external amplier
8. Touch to restore to factory settings
Advance settings
Enter password 0000
AUX | Setting
1. Steering wheel control
2. Select to Turn ON / OFF reverse camera dynamic
guide lines
3. Select to Turn ON / OFF Screenshot capability
4. Touch to select reverse camera Static Trajectory
Adjust settings
5. Touch to select left or right driving position (for
CarPlay), reconnect to allow device to recognize new
selection
6. Touch to select Front Panel light color
7. Touch to adjust brightness of Front Panel light color
Steering Wheel key
when the ( ) s selected, Touch the required icons to
set corresponding to the number of buttons available
on the Steering wheel. Press one steering wheel key
and the screen will show a window with a message
“Press the physical key on the steering wheel”, the
key will save the function of the button after it is
selected on the steering wheel (conrm) with the item
displaying (Activated)(repeat all wanted items before
conrm). One key has just a function after setting for
once. Touch (Calibrate)to recalibrate the key.
11