Blaupunkt San Pedro 950 - Modo de Radio

349
Appendix
Supported iPod/iPhone devices
Our product can support below listed iPod/iPhone gen-
erations:
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod classic
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPhone 4s
• iPhone 4
• iPhone 3GS
"Made for iPod" and "Made for iPhone" mean that an elec-
tronic accessory has been designed to connect speci -
cally to iPod, iPhone respectively, and has been certi ed
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod,
iPhone may a ect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in
the U.S. and other countries.
DivX®, DivX Certi ed® and associated logos are trade-
marks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
This DivX Certi ed® device has passed rigorous testing to
ensure it plays DivX® video.
To play purchased DivX movies,  rst register your device
at vod.divx.com. Find your registration code in the DivX
VOD section of your device setup menu.
DivX Certi ed® devices have been tested for high-quality
DivX® (.divx, .avi) video playback. When you see the DivX
logo, you know you have the freedom to play your favorite
DivX movies. DivX video can include advanced playback
features such as multiple subtitle and audio tracks. Enjoy
your favorite videos—from content you create to videos
you discover online—with DivX Certi ed devices.
Windows® und Windows Media® are registered trade-
marks of the Microsoft Corporation in the U.S.A. and/or
other countries.
This product is protected by certain intellectual property
rights of Microsoft. Use or distribution of such technolo-
gy outside of this product is prohibited without a license
from Microsoft.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
The Parrot trademarks and logo are registered trade-
marks of Parrot S.A.
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in-
cluding interference that may cause undesired operation.
2. Changes or modi cations not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu-
ant to Part15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be de-
termined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of
20 centimeters between the radiator and your body.
Industry Canada Statement
English: This device complies with Industry Canada
licence exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause un-
desired operation of the device.
Français : Le présent appareil est conforme aux CNR d'In-
dustrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
© 2014 All rights reserved by Blaupunkt. This material may
be reproduced, copied or distributed for personal use only.
15_Philadelphia845_ro.indd 349 11.09.14 11:17
20
Modo de radio
Modo de radio
Comenzando la reproducción de radio
En el menú principal, presione el
botón [Radio]. Se muestra el menú de
reproducción de radio.
La pantalla de radio presenta las siguientes
funciones y pantallas:
①
Frecuencia actual
②
Lista preestablecida
③
Selector de banda
④
Sintonizar hacia atrás
Sintonización automática hacia atrás.
(pulsación larga)
⑤
Escanear estaciones preestablecidas
⑥
Sintonizar hacia adelante
Sintonización automática hacia adelante.
(pulsación larga)
⑦
Introducir la frecuencia directamente
⑧
Toca para ver más botones en pantalla
Seleccione el banco de memoria
Pulse el botón [ ] para seleccionar la
banda FM o AM.
Sintonizando una estación
Sintonizando estaciones manualmente
Durante la sintonización manual, la frecuencia se
cambiará en pasos.
Presione brevemente el botón [ ] o [ ]
en la interfaz de usuario para sintonizar una
estación superior / inferior.
Introduzca la frecuencia de
transmisión directamente
Si se conoce la frecuencia de las estaciones
deseadas, se puede ingresar directamente a
través de la pantalla táctil.
Presiona el botón [ ].
Se muestra un teclado numérico para la
entrada de frecuencia.
Ingrese la frecuencia de la estación deseada
con el teclado numérico.
Presione el botón [ OK ].
Aparece el menú de reproducción de radio,
se reproduce la emisora de la frecuencia
introducida.
Empezando búsqueda de estación
Pulse el botón [ ] o [ ] durante aprox. 2
segundos para buscar una estación más alta
/ más baja. Para detener la búsqueda, repita
la operación anterior o presione otras teclas
que tengan funciones de radio.
Exploración de emisoras
Puede usar la función de escaneo para almacenar
estaciones preestablecidas.
Presiona el botón [ ].
La unidad buscará automáticamente y
almacenará las estaciones más fuertes en la
memoria.