18
When you have fi nished making your
changes,
press the OK button B.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Briefl y press on the softkeys 6 to
;.
The assignment of all six memory locations
is displayed.
Press and hold down one of the softkeys
6 to ; for longer than two seconds
to assign the station to that button.
Storing stations automatically
( Travel Store)
You can automatically store the six sta-
tions offering the strongest reception in
the region for the FM and AM wavebands.
The stations are stored in the FMT or AMT
memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
쏅
쏅
쏅
쏅
쏅
Press the BAND button ?.
The "Tuner" menu is displayed.
Press the softkey "Travel Store" 9.
The storing procedure begins. "Travel Store"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Briefl y press on the softkeys 6 to
;.
The assignment of all six memory locations
is displayed.
Press the softkey 6 to ; where the
desired station is stored.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
( Scan)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting Scan
Press and hold down the OK button B
for longer than 2 seconds.
The radio scans the next receivable station.
"SCAN" and the current frequency or the
station name appear intermittently on the
display.
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
SEATTLE MP57-US.indb 18SEATTLE MP57-US.indb 18 3/29/07 3:24:38 PM3/29/07 3:24:38 PM
To Next Page
Loading...
Need help?
General
