EasyManua.ls Logo

Blaupunkt Seattle MP57 - Random Track Play (MIX); Scanning All Tracks on All Cds (Scan); Naming a CD (CDN)

Blaupunkt Seattle MP57
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
ENGLISH
Random track play (MIX)
If necessary, use the NEXT button 2
to change to the CD changer display.
To play the tracks on the current CD in ran-
dom order,
press the softkey "MIX" 6 once or sev-
eral times until "MIX CD" is displayed.
Info line 2 F permanently displays "Mix
CD".
To play the tracks on all inserted CDs in ran-
dom order,
Press the softkey "MIX" 6 once or sev-
eral times until "MIX ALL" is displayed.
Info line 2 F permanently displays "Mix
All".
Cancelling MIX
press the softkey "MIX" 6 once or sev-
eral times until "MIX OFF" is displayed.
Info line 2 F no longer displays "Mix CD"
or "Mix All".
Scanning all tracks on all CDs
( Scan)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
press the OK button B for longer than
2 seconds.
The next track will then be scanned. "SCAN"
and the current track number are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Stopping Scan
To stop scanning,
briefl y press the OK button B.
The currently played track will then contin-
ue to be played normally.
Naming a CD (CDN)
You can name the individual CDs in the CD
changer for easier identifi cation. In addi-
tion, you can change or delete the name of a
CD. The device is capable of storing names
for up to 30 CDs.
Naming a CD or changing a name
(Edit CD Name)
If necessary, use the NEXT button 2
to change to the CD changer display.
Press the softkey "CDN" ;.
The menu for editing CD names is dis-
played.
To rename the current CD or change the
name of the CD,
press the softkey "Edit CD Name" 6.
The 7-character text input is displayed. The
rst character is highlighted.
To switch between the entry positions,
press the
or button >.
To select a character at an entry position,
press the
or button @.
To save the name entered and to exit the
text input,
press the OK button B.
CD-changer mode
SEATTLE MP57-US.indb 29SEATTLE MP57-US.indb 29 3/29/07 3:24:40 PM3/29/07 3:24:40 PM

Table of Contents

Related product manuals