27
ENGLISH
Repeating individual tracks or
whole directories (RPT)
To play the current track repeatedly,
press the softkey "RPT" 7 once or
several times until "REPEAT TRACK" is
displayed.
Info line 2 F permanently displays "Rpt
Trk".
To repeat the whole directory,
press the softkey "RPT" 7 once or
several times until "REPEAT DIR" is dis-
played.
Info line 2 F permanently displays "Rpt
Dir".
Cancelling repeat
To stop the current track or current direc-
tory from being repeated,
press the softkey "RPT" 7 once or
several times until "REPEAT OFF" is
displayed.
Info line 2 F no longer displays "Rpt Trk"
or "Rpt Dir".
쏅
쏅
쏅
CD changer mode
Note:
Information about handling CDs, insert-
ing CDs and operating the CD changer
can be found in the operating instruc-
tions supplied with your CD changer.
Switching to CD changer mode
Press the SOURCE button 4 repeat-
edly until "CDC" appears on the dis-
play.
The CD overview is displayed. The de-
vice starts playing the fi rst CD that the CD
changer detects.
Confi guring the display
In CD changer mode, you can use the NEXT
button 2 to change between CD overview
and CD changer display.
CD overview
The CD overview is displayed as soon as you
start the CD changer mode. In the CD over-
view, all available CDs in the CD changer are
displayed. You can directly select a CD with
the softkeys 6, 7, 8, : and ;. Each
of these softkeys shows
either the CD number (e.g. "Disc 01" if
the CD is located in position 1 in the CD
magazine)
or the name of the CD (how to enter a
name for a CD is described in the sec-
tion "Naming a CD" in this chapter)
or a blank space if the corresponding
position in the CD magazine does not
contain any CD.
쏅
•
•
•
MP3/WMA mode CD-changer mode
SEATTLE MP57-US.indb 27SEATTLE MP57-US.indb 27 3/29/07 3:24:40 PM3/29/07 3:24:40 PM
To Next Page
Loading...
