17
Bluetooth® technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth® connection, you must
rst pair the car sound system and the Bluetooth®
device. When you pair the devices, a Bluetooth®
connection is subsequently established automati-
cally. This connection remains in e ect as long as
the Bluetooth® device is within range. If the con-
nection is interrupted, e.g. because you moved
the cell phone outside the range, the connection
is automatically re-established as soon as you are
back within range.
Only one Bluetooth® device can be connected
with the car sound system. If you connect a new
device with the car sound system, the connection
to a currently connected device is automatically
interrupted. However, the car sound system leaves
up to 5di erent Bluetooth® devices paired, and
you can quickly and easily connect any of these
devices with the car sound system again.
The Bluetooth® menu
In the Bluetooth® menu, you nd all the functions
for pairing, connecting and managing Bluetooth®
devices.
Calling the Bluetooth® menu
쏅 Brie y press the MENU button
2
to open
the user menu.
쏅 Turn the volume control
4
until the
"BLUETOOTH" menu item is selected.
쏅 Press the On/O button
3
to open the Blue-
tooth® menu.
쏅 Turn the volume control
4
until the desired
menu item is selected.
쏅 Perform the setting (see the following sec-
tions).
쏅 Brie y press the MENU button
2
to exit the
menu.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 30 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• In the menu, you can press the button
7
in each case to return to the higher
menu level.
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu dur-
ing this time, "LINK BUSY" brie y appears
on the display. If you want to cancel the
Bluetooth® process and open the Blue-
tooth® menu, press the 5
button
=
.
Pairing and connecting a Bluetooth®
device
Notes:
• You can pair up to 5 Bluetooth® devices
with this car sound system. Before you can
pair another device, you must rst unpair
one of the already paired devices (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices"). If you should attempt to pair a
fth Bluetooth® device, "PHONE LIST FULL
– PLEASE DELETE ENTRIES FROM LIST" is
displayed.
• If a connection with a Bluetooth® device
currently exists, this connection is auto-
matically disconnected if you pair and
connect another device.
쏅 In the Bluetooth® menu, select the "PAIRING"
menu item.
쏅 Press the On/O button
3
to pair a Blue-
tooth® device.
The display shows "PRESS > TO CONFIRM".
쏅 Press the
button
7
.
Bluetooth®
To Next Page
Loading...
Need help?
General
Weight and Dimensions
