18
Bluetooth®
The display shows "ENTER PIN" and the cur-
rently stored PIN (default "1234"). In addi-
tion, the Bluetooth® icon ashes. The car
sound system can now be recognised by a
Bluetooth® device for approx. 2 minutes and
connected.
쏅 Search the car sound system from your Blue-
tooth® device (Bluetooth® name: "BP 230 BT").
쏅 Establish the connection from your Blue-
tooth® device. Enter the PIN displayed by the
car sound system.
The display brie y shows "PAIRED", followed
by "CONNECTED", as soon as the car sound
system and the Bluetooth® device are paired
and connected.
Notes:
• If no connection can be established, the
display brie y shows "CONNECT FAILED".
• If a Bluetooth® device is connected with
the car sound system, the display shows
the Bluetooth® icon
.
• If the device connected last cannot be
located after switching on the car sound
system, the car sound system attempts to
connect one of the other paired devices. If
none of the devices is located, the display
brie y shows "NO DEVICE".
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "CALL" and the number of the caller. The
current audio source is muted and a ring tone is
played via the loudspeakers of the car sound sys-
tem.
Note:
If the number of the caller is not being trans-
mitted, the display shows "PRIVATE" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the num-
ber are displayed.
쏅 Press the
button
<
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
쏅 Press the 5
button
=
to reject the call or
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control
4
or mute the
device with a short press of the On/O
button
3
.
• You can preset the hands-free volume
in the user menu (see the chapter "User
settings", section "Making settings in the
"VOLUME" menu", menu item "TEL VOL").
• If the car sound system is switched o with
active ignition, it automatically switches
on with an incoming call. This allows you to
make the call over the hands-free system.
After the call has ended, the car sound sys-
tem automatically switches o again.
Making a call
쏅 In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
쏅 Press the On/O button
3
to open the entry
menu.
You can now enter a phone number with up
to 20 digits:
쏅 Turn the volume control
4
to select a digit
for the respective position.
쏅 Press the
or button
7
to reach the next
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/O button
3
.
• While entering the phone number, you
cannot change the volume or mute the car
sound system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
