25
FADER
Front/rear volume distribution. Settings: F9 (front)
to R9 (rear).
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
until the desired
volume distribution is set.
X-BASS
Increase of bass at low volume. Settings: ON, OFF.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change
between the settings.
PRESETS
Selecting equalizer presettings. Settings: POP,
ROCK, CLASSIC, EQ OFF.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change
between the settings.
SUB-OUT (subwoofer output)
Switching the subwoofer output on or o .
Settings: ON, OFF.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
to change
between the settings.
AMP DELAY
Setting the delay with which a connect ampli er
is switched in.
Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay)
.
쏅 Press the On/O button
3
to change the
setting.
쏅 Turn the volume control
4
until the desired
delay is set.
User settings
Calling the user menu and selecting
a menu
쏅 Brie y press the MENU
2
button to open
the user menu.
In the user menu, the user settings can be found in
the following menus:
• FM TUNER
• DAB TUNER
• AUDIO (see chapter "Sound settings")
• DISPLAY
• VOLUME
• CLOCK
• VARIOUS
• BLUETOOTH (see the chapter "Bluetooth®")
쏅 Turn the volume control
4
until the desired
menu is selected.
쏅 Press the On/O button
3
to open the
selected menu.
쏅 Turn the volume control
4
until the desired
menu item is selected.
쏅 Perform the setting (see the following sec-
tions).
쏅 Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
7
in each case to return to the higher
menu level.
• The menu does not allow changing the
volume or muting (Mute) the car sound
system.
Sound settings | User settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
