Blaupunkt Toronto 400 BT - Streaming Audio and Speed Dial

42
Note:
If the dialed number is stored together with a
name, the name of the entry and the number
are displayed (see the ch. "Storing a phone
number").
As soon as your calling party answers the call,
the display alternately shows "CALL" and the
time of the current phone call.
Storing phone numbers
In the Bluetooth® menu, select the "DIAL
NEW" menu item.
Press the
button >.
You can now enter a phone number with up
to 20 digits:
Press the button
@ / 2 repeatedly
until the desired number appears at the
respective current location.
Press the button
5 / > to change
between the locations of the number.
Press the desired memory button 1 - 5 < for
approx. 2 seconds to store only the number.
- or -
Press the MENU•OK
button ? to enter a
name for the entry.
You can now enter a name with up to 9 char-
acters:
Press the button
@ / 2 repeatedly
until the desired character appears at the
respective current location.
Press the button
5 / > to change be-
tween the locations of the name.
Press the desired memory button
1 - 5 < for approx. 2 seconds to store the
number and name.
Note:
A number previously stored on the memory
button is replaced.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Speed dial
With speed dial, you can call the number dialed
last or a stored number (see ch. "Storing a phone
numbers").
Press the
button B.
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIR" menu
item is selected.
If necessary, press a memory button 1 - 5 <
to call the number stored.
Press the
button B to call the number.
"OUTGOING" and the dialed number are alter-
nately shown on the display.
Bluetooth® streaming mode
Starting the Bluetooth® streaming mode
Press the SRC button 6 repeatedly until
"BT STREAM" appears on the display.
The playback starts.
Notes:
The Bluetooth® streaming mode can be se-
lected only if a suitable streaming device is
connected.
If the connection to the streaming device
is lost during playback, the display briefl y
shows "CON LOST" (connection lost) and
the car sound system changes to the previ-
ous audio source.
Selecting tracks
Briefl y press the button
5 / > to
change to the previous/next track.
쏅
쏅
쏅
쏅
•
•
쏅
Bluetooth®
02_Toronto400BT_gb.indd 4202_Toronto400BT_gb.indd 42 03.02.2009 16:04:23 Uhr03.02.2009 16:04:23 Uhr