47
ENGLISH
User settings
Calling and exiting the user menu
Briefl y press the MENU•OK button ? to
open the menu.
Press the button
@ / 2 repeatedly
until the desired menu item is selected.
Perform the setting (see the next section).
Briefl y press the MENU•OK button ? to
select a different menu item.
- or -
Briefl y press the DIS/ESC button = to exit
the menu.
Note:
The menu is automatically exited approx.
15 seconds after the last button activation
and you are returned to the display of the cur-
rent audio source.
Performing settings in the user menu
CDC
Setting the rear AUX input mode Settings: ON (to
connect a CD changer or another external audio
source), OFF (to connect a C‘n‘C-ready Blaupunkt
interface).
Press the
button > to open the sub-
menu.
Press the
button > to change between
the settings.
Briefl y press the MENU•OK button ? to
confi rm the selected setting.
The car sound system automatically switches
off and on again with the selected setting.
C‘N‘C
Assigning an individual device number to con-
nected C‘n‘C-ready interfaces (C‘n‘C = Command
and Control). Length: 4 digits, characters: 0-9,
A-F (hexadecimal).
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press the
button > to open the sub-
menu.
Press the button
@ / 2 to select the
interface ("DEV 1 - 3").
Press the
button > to change the device
number.
Press the button
5 / > to change
between the positions.
The character at the selected position fl ashes
if selected.
Press the button
@ / 2 to select a
character at the selected location.
Briefl y press the MENU•OK button ? to
confi rm the device number entered.
CDTEXT
Switching the display of CD text on or off. Set-
tings: ON, OFF.
Press the
button > to open the sub-
menu.
Press the
button > to change between
the settings.
Briefl y press the MENU•OK button ? to
confi rm the selected setting.
TA VOLUME
(only for tuner region "EUROPE")
Setting the minimum volume for traffi c announce-
ments. Settings: 1 - 50.
Press the
button > to open the sub-
menu.
Press the button
@ / 2 or turn the
volume control 4 to perform the setting.
SENS
Only possible in FM radio mode: Setting the sen-
sitivity of station seek tuning. Settings: LO1 (low-
est) – HI6 (highest).
Press the
button > to open the sub-
menu.
Press the button
@ / 2 to perform
the setting.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
User settings
02_Toronto400BT_gb.indd 4702_Toronto400BT_gb.indd 47 03.02.2009 16:04:24 Uhr03.02.2009 16:04:24 Uhr
To Next Page
Loading...
