21
Notes:
• If no Bluetooth® connection is established
when voice recognition is activated,
the display brie y shows "VOICE DIAL
FAILED – NO BT CONNECTION".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display brie y shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the button
<
.
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Storing a phone number in the car sound
system
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section).
A phone number is stored for the currently con-
nected telephone and is available only for this tel-
ephone. The car sound system can store up to ve
numbers for up to ve paired devices.
쏅 Enter the phone number as described in the
section "Making a call".
쏅 Press the desired memory button 1-5
>
for
approx. 2 seconds to store only the number.
- or -
쏅 Press the rotary control
7
for approx. 2 sec-
onds to enter a name for the entry.
You can now enter a name with up to 15 char-
acters:
쏅 Turn the rotary control
7
to select a charac-
ter for the respective position.
쏅 Press the rotary control
7
to go to the next
position.
Note:
To return to the previous position in the entry
menu, turn the rotary control
7
until the "<"
option is selected, and press the rotary con-
trol
7
.
쏅 Press the desired memory button
1 - 5
>
for approx. 2 seconds to store the
number and name.
The display brie y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memo-
ry button is replaced.
• If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
쏅 press the button
=
.
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
쏅 Press the
button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
To call a stored number,
쏅 press the
button
=
.
쏅 Press a memory button 1 - 5
>
to call the
number stored.
Note:
If no number is stored under the selected
memory button, the display brie y shows
"NO NUMBER".
쏅 Press the button
=
to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Bluetooth®
To Next Page
Loading...
