28
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
PRESET EQ (sound pro le)
Selecting equalizer presettings. Settings: POP,
ROCK, CLAS (classic), OFF (no presetting).
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
SUB-OUT
Setting the level and frequency of the preampli-
er output.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to change be-
tween the following menu items:
– FREQUENCY
(settings: 80/120/160 Hz)
– GAIN
(settings: 0 to +7)
쏅 Press the rotary control
7
to change the
setting for the selected menu item.
쏅 Turn the rotary control
7
to set the level or
frequency.
쏅 Press the rotary control
7
to con rm the
setting.
AMP DELAY
Setting the delay with which a connect ampli er
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay)
.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
delay is set.
쏅 Press the rotary control
7
to con rm the
setting.
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle.
The equaliser also provides an adjustable increase
of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
쏅 In the "AUDIO" menu, select the "EQUALIZER"
menu item.
쏅 Press the rotary control
7
to open the menu.
쏅 Turn the rotary control
7
to change be-
tween the following menu items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are
not automatically exited after the last key has
been activated. After the setting, press the
MENU button
2
to exit the menu.
EQUALIZER
Switching the equalizer on or o . Settings: ON,
OFF.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
to change be-
tween the settings.
쏅 Press the rotary control
7
to con rm the
setting.
Sound settings
To Next Page
Loading...
