27
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(Loudness)
• Selecting a sound pro le
• Setting level and frequency of the preampli er
output (Sub-Out)
• Adjusting the time delay for switching in an
external ampli er
• Setting the 3-band equaliser
Calling and exiting the "AUDIO"
menu
쏅 Brie y press the MENU button
2
to open
the user menu.
쏅 Turn the rotary control
7
until the "AUDIO"
menu item is selected.
쏅 Press the rotary control
7
to open the
"AUDIO" menu.
쏅 Turn the rotary control
7
until the desired
menu item is selected.
쏅 Perform the setting (see the next section).
쏅 Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
15 seconds after the last button activation
and you are returned to the display of the
current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
level is set.
쏅 Press the rotary control
7
to con rm the
setting.
TREBLE
Treble. Settings: –7 to +7.
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
level is set.
쏅 Press the rotary control
7
to con rm the
setting.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
volume distribution is set.
쏅 Press the rotary control
7
to con rm the
setting.
FADER
Front/rear volume distribution. Settings: F9 (front)
to R9 (rear).
쏅 Press the rotary control
7
to change the
setting.
쏅 Turn the rotary control
7
until the desired
volume distribution is set.
쏅 Press the rotary control
7
to con rm the
setting.
Sound settings
To Next Page
Loading...
