VOLUME DISTRIBUTION
ADJUSTING THE DISPLAY
Adiustinq the front/back volume
Adjusting the display
distribution (fader)
You can adjust the display to suit the
0 To adjust the fader, press the AU-
installation position in your vehicle and
010 button 0.
your own preferences.
“AUDIO 1” appears in the display.
Adjustins the viewing anqle
0 Press the softkey @ assigned to 0
the “FADE” display item.
0
0 Move the joystick @ up/right or
down/left to adjust the front/back
volume distribution.
3
When you have finished making your
changes,
0
0 press the joystick OK @ or the
AUDIO button @.
0
Press the MENU button @.
Press the softkey @ assigned to
the “DISP” display item.
Press the softkey @ assigned to
the “ANGL” display item.
Move the joystick @ up/right or
down/left to adjust the viewing an-
gle.
Press the joystick OK @ or the
MENU
button (‘8) to close the
menu.
The settings are saved.
Adiusting the displav brightness
If your car radio has been connected
as described in the installation instruc-
tions, the display brightness will switch
over when the headlights are turned on/
off. The display brightness can be ad-
justed separately for night and day in
steps ranging from l-6. We recommend
setting “6”.
Daytime display brightness
0 Press the MENU button @.
0 Press the softkey @ assigned to
the “DISP” display item.
0 Press the softkey @ assigned to
the “DAY” display item.
0 Move the joystick @ up/right or
down/left to adjust the brightness.
l
BLAUPUNKT
15