Blaupunkt TravelPilot 300 - Confi Guring the PIN Query; Locking;Unlocking the Device; Changing the PIN

14
Performing basic settings
Note:
During the PIN entry, you have only 3 attempts
to enter the correct PIN or subsequently 3 at-
tempts to enter the correct PUK. If you enter
an incorrect PUK for the 3rd time, your device
is permanently blocked and the device must
be returned via the Blaupunkt service.
Confi guring the PIN query
Touch the symbol in the main
menu.
The Settings menu is displayed.
Touch the symbol.
The Anti-Theft Protection menu is
displayed.
Touch the Protection Setup button.
Touch the OK button.
The PIN query is displayed.
Follow the instructions and enter a self-
selected PIN.
Touch the OK button.
The initial confi guration of the PIN is followed by a
request to enter a PUK. The PUK is used to unlock
the device if you should forget the PIN.
Follow the instructions and enter a self-
selected PUK.
Touch the OK button.
To secure your PUK:
Register under http://puk.blaupunkt.com
and follow the instructions.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Locking/unlocking the device
Prerequisite:
You confi gured the PIN query.
In the Anti Theft Protection menu, touch the
Protection Setup button to lock the device
(check mark) or to unlock it (no check mark).
The PIN query is displayed.
Enter your PIN.
Touch the OK button.
Changing the PIN
In the Anti Theft Protection menu, touch the
Change PIN Code button.
The PIN query is displayed.
Follow the instructions and enter a new self-
selected PIN.
Touch the OK button.
•
쏅
쏅
쏅
쏅
쏅
쏅
TravelP_300_lo_GB.indd 14TravelP_300_lo_GB.indd 14 25.04.2008 13:23:03 Uhr25.04.2008 13:23:03 Uhr