Blaupunkt TravelPilot Lucca 3.5 - Copying a Destination from the Map; Storing the Position

Navigation | Storing the position
19
Copying a destination from the map
Touch the symbol in the Navigation
menu.
The Destination Input menu is dis-
played.
Touch the button.
The display shows the second page
of the menu.
Touch the symbol.
The map is displayed.
Move and scale the map as described in the
chapter "Working with the map".
Touch a location of your choice.
The city is selected and its name appears
in the lower display bar.
Touch the button.
The coordinates to the selected loca-
tion are displayed.
Touch the Start Route Guidance button.
The route is calculated and the route guidance
started.
- or -
Touch the button to call up the add-
on menu.
You have now the following options:
Defi ning route options (chapter
"Specifying route options")
Calculating a route (ch. "Calcu-
lating a route")
Saving a destination as favourite
(ch. "Managing destinations")
Displaying a destination on the
map (ch. "Working with the
map")
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
–
–
–
–
Storing the position
You can store your current position and later use
it as a destination.
Touch the symbol in the main menu
of the Lucca.
The map is displayed.
Touch the symbol.
The Navigation menu is displayed.
Touch the symbol.
The Position Information menu is
displayed.
This menu contains this information:
The address of the current location, if it is
contained in the map material
Latitude/Longitude: Current position in
east longitude and north latitude
Altitude: Current height above mean sea
level
The compass: Driving direction (reliable
information after approx. 5 km/h)
Touch the Save As Destination button.
The keyboard is displayed.
Enter a name for the destination and confi rm
with OK.
The destination is stored under the name en-
tered in the Favourites menu.
쏅
쏅
쏅
–
–
–
–
쏅
쏅
Lucca3_5B_long_GB_NEU•.indd Abs2:19Lucca3_5B_long_GB_NEU•.indd Abs2:19 04.10.2007 16:49:33 Uhr04.10.2007 16:49:33 Uhr