Confi guring Lucca
35
Confi guring Lucca
The Lucca features two menus in which you can
perform settings:
Device settings: The properties of the device
are defi ned here.
Setting for the navigation: The properties of
the navigation are defi ned here.
Map settings: Settings for the map view (ch.
"Working with the map", "Performing map
settings").
Device settings
In the Settings menu of the Lucca, you can defi ne
settings for the following areas:
Display brightness
Button sounds (sound of the buttons)
Language
Clock
Saving energy
Theft protection
The second page of the menu also contains the
following settings:
Factory settings
Calibrating the touchscreen
Product information
Demo mode
Touch the symbol in the main
menu.
The Settings menu is displayed.
/ Touch the button to scroll
in this menu.
If you performed changes to the settings:
Touch the button to exit the menu.
Display brightness
In the Display Brightness menu, you can set the
display brightness for day and night mode. In ad-
dition, you can control the sensitivity of the light
sensor for automatic day/night switching.
Touch the symbol.
The Representation menu is dis-
played.
•
•
•
•
•
•
•
•
•
•
•
•
•
쏅
쏅
쏅
쏅
Touch the Brightness Day button to adjust
the display brightness for day mode.
Touch the Brightness Night button to adjust
the display brightness for night mode.
Touch the Switch Threshold button to in-
crease or decrease the sensitivity of the au-
tomatic switching.
Button sound
Touch the symbol to activate (check
mark) or deactivate (no check mark)
the sound when touching a button.
Language
In the Language menu, you can defi ne the language
in which the menus of the Lucca are displayed.
The voice outputs also use the defi ned language, if
available. If the selected language is not available
for the voice output, it is output in English.
Touch the symbol.
A list with available languages is
displayed.
Touch the language in the list that you want to
use for menus and voice output.
Clock
In the Clock menu, you can select the
time zone for your current position, ad-
just the daylight savings time and switch
between 12-hour and 24-hour display. Only if you
specifi ed the correct time zone can the Lucca pro-
vide the correct arrival time during a route guid-
ance.
For further details, read the chapter "Performing
basic settings", "Adjusting the time zone".
Saving energy
Touch the symbol to switch the en-
ergy-savings mode on (check mark)
or off (no check mark).
If you activated the energy-savings mode, the
display is switched darker after 1 minute of
inactivity to consume less power. The Lucca
does not change to energy-savings mode if it
is supplied by an external power source or you
are in navigation.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Lucca3_5B_long_GB_NEU•.indd 35Lucca3_5B_long_GB_NEU•.indd 35 04.10.2007 16:49:40 Uhr04.10.2007 16:49:40 Uhr
To Next Page
Loading...
