Need help?Do you have a question about the Blendtec CONNOISSEUR 825 and is the answer not in the manual?
Provides introductory context for safe blender operation.
Details certification ensuring electrical and mechanical safety standards.
Warns against touching blades and moving components during operation.
Instructs to return damaged units for professional inspection and repair.
Prohibits immersion of the motor base in water or use in wet outdoor conditions.
Advises against using non-food items, which can cause damage or injury.
Emphasizes the necessity of having the lid securely attached during operation.
Warns against using non-Blendtec attachments to prevent hazards.
Stresses that the blender jar must be correctly seated on the motor base.
Advises caution when blending hot liquids due to potential steam release.
Outlines safety measures for the power cord, including avoiding damage and extension cords.
Directs users to qualified service agents for power unit repairs to avoid voiding warranty.
Recommends turning off the blender when not in use or when changing locations.
Warns that the drive socket and jar shaft can become hot after blending.
General safety note regarding supervision for persons with limited experience.
Instructs users to avoid filling the blender jar beyond its marked capacity.
Steps for removing the blender and its components from packaging.
Instructions for recording essential blender identification and purchase details.
Guidance on registering the product online for warranty and support.
Details the parts and functions of the blender's motor base unit.
Describes the components and features of the blender jar assembly.
Information on specific circuit voltage and protection needed for the blender.
Covers installation, quick start, cycles, controls, programming, and settings for the Stealth 875TM.
Details quick start, cycle operation, and pulse function for the Connoisseur 825TM.
Covers quick start, controls, and profile configuration for the Chef 775TM.
Instructions for quick start, modes, and pulse function on the EZ 600TM.
Procedures for cleaning the blender jar after use and for long-term sanitation.
Guidelines for cleaning the motor base and sound enclosure, with safety precautions.
Important advice and warnings to prevent damage during cleaning.
Troubleshooting steps for a blender that does not power on.
Explains error codes and troubleshooting steps for different blender models.
Addresses increased noise levels and problems with blending texture or performance.
Troubleshooting steps for a non-responsive blender control surface.
Outlines the terms, duration, and exclusions of the blender warranty.
Details warranty exclusions related to water damage and improper use.
Explains warranty validity based on country of purchase and service procedures.
Steps for contacting customer service and handling warranty repairs or replacements.
General| Manual Speed Control | Yes |
|---|---|
| Jar Capacity | 90 oz |
| Sound Enclosure | No |
| Type | Countertop Blender |
| Manufacturer | Blendtec |
| Voltage | 120 V |
| Controls | Touchpad |
| Pulse | Yes |
| Blade Material | Stainless steel |
| Speed Settings | 10 |
| Motor | 3.8 peak horsepower |
| Jar Compatibility | Compatible with Blendtec jars |
| Jar Material | BPA-Free Copolyester |
| Warranty | 3-year warranty |
| Preprogrammed Cycles | 30 preprogrammed cycles |
| Amperage | 15 A |
To Next Page