Need help?Do you have a question about the Blendtec DESIGNER SERIES and is the answer not in the manual?
Details ETL and NSF certifications ensuring electrical, mechanical, and food safety standards.
Essential guidelines to avoid injury and damage, covering moving parts, lid use, hot liquids, and proper handling.
Procedures for handling damaged units and avoiding voiding the warranty through unauthorized repairs or tampering.
Instructions for safely removing the blender from packaging and checking contents.
Guide to record essential identification details for service and warranty claims.
Information on how to register the blender online for warranty and support.
Identifies key parts of the motor base, including interface, drive socket, and power unit.
Details the parts of the blender jar, including the jar itself, blade, and lid.
Instructions for correctly placing the blender and ensuring adequate power supply and surge protection.
Step-by-step guide for initial use and making a recipe.
Explanation of various preprogrammed blend cycles and their functions.
Details on specific cycles and controls for the Designer 600 model.
Details on specific cycles and controls for the Designer 625 model.
Details on specific cycles and controls for the Designer 675 model.
Details on specific cycles and controls for the Designer 700 model.
Details on specific cycles, controls, and Blend Rewards for the Designer 725 model.
Details on specific cycles and controls for the Express model.
Instructions for using the Clean cycle and manual cleaning methods.
Method for sanitizing the blender jar using bleach solution for extended periods.
Advice on what to avoid during cleaning, like abrasive materials or submerging the motor.
Steps to diagnose and resolve issues when the blender motor does not power on.
Explains common error codes and icons displayed on the LED information center.
Guidelines to identify the source of unusual noise and when to contact service.
Tips to correct issues like lumpiness or uneven blending, including cavitation.
Outlines what is covered and excluded under the manufacturer's warranty.
Specifies the duration and terms of the limited warranty for material and workmanship defects.
Steps to follow for obtaining service or replacement when the blender is under warranty.
Instructions for customers seeking repair services for blenders no longer covered by warranty.
General| Motor Power | 1560 watts |
|---|---|
| Pre-programmed Cycles | 6 |
| Weight | 7.28 lbs |
| Touchscreen Interface | Yes |
| Blade Material | Stainless Steel |
| Voltage | 120 V |
| Warranty | 8 years |
| Speed Settings | 10 |
| Jar Capacity | 90 oz |
| Jar Material | Eastman Tritan copolyester |
To Next Page