3
1.15 TURN THE BLENDER OFF WHEN NOT IN USE
1.16 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER
EXTENSIVE USE
The blender drive socket may become hot after numerous cycles�
1.17 SAFETY
This appliance is not intended for use by persons (including children with
lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their
safety� Children should be supervised to ensure that they do not play with the
appliance�
1.18 DESIGNER SERIES BLENDERS ARE INTENDED FOR HOME
USE ONLY! ANY USE OF THE DESIGNER SERIES BLENDER
FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES
1.19 NEVER OPERATE THE BLENDER WITH MORE THAN THE
MARKED CAPACITY OF THE JAR
SECTION 2: UNPACKING
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
• Designer series blender motor base
• Blender jar with lid
• Blendtec 101 booklet
• Customer Service and Warranty Registration Card
Additional literature may be included depending on package configuration
1� Remove blender motor base, blender jar, and lid from packaging�
2� Unwind the power cord�
3� Check for any packing material that may have blocked ventilation holes on the
underside of the blender motor base�
4� Inspect all items to ensure no damage occurred during shipment�
5� If any damage has occurred, contact your Blendtec service agent immediately�
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Record your blender motor serial number and date of purchase in the space be-
low� You will need these when contacting Blendtec for service or questions�
Motor Serial #(Found on bottom of motor base):________________________
Date of Purchase: ______________________________________________
Purchased From: ______________________________________________
To Next Page
Loading...
