Blendtec Professional Series

Other manuals for Blendtec Professional Series

Owner's Manual And User's Guide11 pages

Need help?

Do you have a question about the Blendtec Professional Series and is the answer not in the manual?

Summary

IMPORTANT SAFEGUARDS

SAFETY CERTIFICATION

Details ETL certification for the blender.

HEALTH CERTIFICATION

Details NSF certification for the blender and accessories.

AVOID CONTACT WITH MOVING PARTS

Lists precautions to prevent injury from moving parts.

NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

Instructions for handling damaged blenders.

NEVER OPERATE BLENDER IN LIQUID

Warning against submerging the motor base or outdoor use.

NEVER PUT NON-FOOD ITEMS INTO JAR

Warning against foreign objects and handling of blades.

NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

Emphasizes using the blender with the lid securely attached.

NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC

Warns against using unauthorized attachments.

CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING

States the container must be secured during operation.

BLADES ARE SHARP! HANDLE CAREFULLY!

Safety warning regarding sharp blades.

WHEN BLENDING HOT LIQUIDS, REMOVE CENTER PIECE OF LID

Specific instruction for blending hot liquids.

POWER CORD PRECAUTIONS

Guidelines for safe use of the power cord.

NEVER ATTEMPT TO REPAIR THE POWER UNIT

Advises against self-repair of the power unit.

TURN THE POWER SWITCH OFF WHEN NOT IN USE

Instruction to turn off the power switch when not in use.

AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE.

Warning about the drive socket getting hot.

CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN.

Safety note on supervision around children.

THE CONNOISSEUR IS INTENDED FOR HOME USE ONLY!

Clarifies intended use and warranty voiding for commercial use.

UNPACKING AND SETUP

UNPACKING YOUR BLENDER

Lists items received and steps for unpacking.

RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Instructions for recording important product details.

REGISTRATION OF YOUR BLENDER

How to register the blender online or via mail.

BLENDER OVERVIEW

BLENDER MOTOR

Details the blender motor housing, touch pad, LCD, power unit, and switch.

BLENDER JAR ASSEMBLY

Describes the jar, blade assembly, and lid components.

POWER SPECIFICATIONS

States voltage, amperage, and wattage requirements.

INSTALLATION

CONNOISSEUR ABOVE COUNTER INSTALLATION

Steps for setting up the blender on a countertop.

CONNOISSEUR IN-COUNTER INSTALLATION

Instructions for integrating the blender into a countertop.

CARE AND CLEANING

AFTER USE CLEANING

Daily cleaning procedure for the blender jar and base.

LONG-TERM SANITATION

Method for deep cleaning and sanitizing the blender jar.

CLEANING TIPS AND CAUTIONS

Important notes and warnings for cleaning.

OPERATIONAL OVERVIEW

MAIN POINTS OF OPERATION

Basic steps for operating the blender.

AUTOMATIC CYCLE OPERATION

Explains pre-programmed cycles and speed controls.

TROUBLESHOOTING

BLENDER MOTOR WILL NOT TURN ON

Steps to diagnose and fix a blender that won't power on.

NOISE LEVEL CHANGES

How to identify and address unusual noise from the motor or jar.

BLENDED TEXTURE UNSATISFACTORY

Tips for improving blended product texture and troubleshooting issues.

WARRANTY INFORMATION

WARRANTY DESCRIPTION (US Domestic and Canada)

Outlines warranty coverage for motor, jar, and blade.

LIMITED FIVE YEAR WARRANTY

Details the specific terms of the five-year motor warranty.