Blendtec Professional Series - CARE AND CLEANING; AFTER USE CLEANING; LONG-TERM SANITATION; CLEANING TIPS AND CAUTIONS

CN-10
SECTION5
CAREANDCLEANING
5.1AFTERUSECLEANING
1. Add 1 cup of hot water and a drop of liquid dishwashing soap to the blender jar.
2. Place the lid tightly onto the jar. Place the blender jar on the blender base, and
with your hand placed on top of the lid; press the pulse button for 5 seconds.
3. Rinse with clear water until all soap is rinsed from jar and lid.
4. Clean the blender base by simply wiping the base and touchpad with a damp rag
and water.
5.2LONG-TERMSANITATION
1. For long-term sanitation, occasionally ll the blender jar half way with hot water.
2. Add one teaspoon of liquid chlorine bleach.
3. Stir for 10 seconds to mix water and bleach. Let mixture stand in blender jar for
ve minutes.
4. Empty water/bleach mixture and rinse the jar thoroughly to ensure that there is
no bleach mixture left in the jar. Turn jar RIGHT SIDE UP on dish rack until dry.
5.3CLEANINGTIPSANDCAUTIONS
• Do not use abrasives or stiff brushes to clean the blender base or jar as this will
dull or scratch the surface. Cosmetic damage is not covered by warranty.
• NEVER submerge the blender motor in water. Avoid submerging blender jars for
more than 5 minutes. Water penetration through the lower jar seals will reduce
the life of the jar. After cleaning, we recommend the blender jar be stored up-
right.
• BLENDER JAR IS DISHWASHER SAFE - TOP RACK ONLY! Extreme temperatures
damage the lower seal to the jar.








