Blendtec Professional Series - UNPACKING AND SETUP; UNPACKING YOUR BLENDER; RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE; REGISTRATION OF YOUR BLENDER

CN-3
SECTION2
SAVEALLPACKAGINGMATERIALSANDINSTRUCTIONSFORFUTUREUSE.
2.1UNPACKINGYOURBLENDER
You should have received the following items:
• Connoisseur™ motor base
• Black motor stand
• 64 oz blender jar with lid
• 96 oz blender jar with lid
• Recipe book
1. Remove blender motor, blender jar and lid from packaging.
2. Unwind the power cord.
3. Check for any packing material that may have blocked ventilation holes in
the blender motor.
4. Inspect all items to ensure no damage occurred in shipment.
5. If any damage has occurred contact your Blendtec service agent
immediately.
2.2RECORDINGYOURSERIALNUMBERANDDATEOFPURCHASE
Record your blender motor serial number and date of purchase in the space below.
You will need these when contacting Blendtec for service or questions.
Motor Serial #:
____________________________________________________
(Found on bottom of motor base)
Date of Purchase:
____________________________________________________
Purchased From:
____________________________________________________
2.3REGISTRATIONOFYOURBLENDER
Register online at www.blendtec.com (select “Product Registration”
under the ‘Service’ button) or return the registration card to the address provided.