Need help?Do you have a question about the Blendtec Rapid Rinser and is the answer not in the manual?
NSF certification and guidelines for safe water hose usage and handling to prevent hazards.
Instructions on turning off water, operating with a container, and handling damaged units safely.
Requirements for backflow protection and maximum water temperature for safe operation.
Identifies external parts of the Rapid Rinser, referencing Figure 1.
Identifies internal parts of the Rapid Rinser, referencing Figure 2.
Instructions for unpacking the Rapid Rinser and listing its included items.
Instructions for placing the rinser in the sink and positioning the container over the nozzle.
Connecting the water hose, turning on water, and priming the rinser unit.
Steps to place the container, turn on water, and press down to activate the rinse.
Guidance on releasing downward pressure once the rinsing is satisfactory.
Instructions for removing the rinsed jar and allowing it to dry in an inverted position.
Instruction to turn off water supply when the rinser is not in use to prevent accidental spray.
Procedure for cleaning and sanitizing the rinser for short-term storage.
Detailed procedure for disassembling, cleaning, sanitizing, and reassembling the rinser.
Details the warranty period for the Rinser and its components, including lifetime spray nozzle warranty.
Notes that obvious abuse or mistreatment may void the product warranty.
Instructions on how to contact Blendtec representatives for service needs.
Lists dimensions, weight, and drain connection details for the Rapid Rinse Station.
Instructions for placing the Rapid Rinser in the station and connecting the drain line.
Procedures for cleaning and sanitizing the surfaces of the Rapid Rinse Station.
Information on the designated area for storing and drying blender jars.
To Next Page
General