9
SECTION 8 – RAPID RINSE STATION
With the addition of the Rapid Rinse Station you will no longer need to place your Rapid
Rinser in a sink� With a water line and a drain line, you can put the Rapid Rinse Station in
the most convenient spot in the store� Most people like to put it right next to their Blendtec
blender to save time and make life smoother�
8.1 SPECIFICATIONS
DIMENSIONS: 20�2” L x 8�3” W x 6�5” H (51�3 cm x 21�1cm x16�5 cm)
WEIGHT: 5�3 lbs� (2�4 kg)
DRAIN CONNECTION: 3/4” Garden Hose Thread
8.2 DIRECTIONS
▶
Place the Rapid Rinser in the Rapid Rinse Station as shown below� If you already own the
Rapid Rinser, remove the four suction cups on the bottom before placing in the station�
▶
Connect a 3/4” garden hose drain line to the back of the rinse station and in accordance
with your local codes� We recommend using a licensed plumber for installation� Make sure
the drain line slopes away from the station since it is a gravityi-driven system�
▶
Do not allow the water line or drain line to hang over the edge of the work surface�
▶
Always shut the water off at the source before cleaning, moving, or servicing
FrontBack