Blendtec Professional Series - BLENDED TEXTURE UNSATISFACTORY

CN-13
7.3BLENDEDTEXTUREUNSATISFACTORY
If the blended texture of product is lumpy or uneven, do the following:
• Ensure the mixture is not cavitating during the cycle. Cavitation is a condition
in which the blender blade spins freely in an air pocket within the drink mix
because the mix is too cold or too solid. This problem can be corrected by in-
creasing the mix temperature by reducing ice, increasing liquid and/or ensuring
that the frozen ingredients used in the recipe are never colder than 10 degrees
Fahrenheit (-12 degrees Celsius).
• Increase cycle time. If the drink is mixing well but has not had enough time for
complete blending hold the “Pulse” button for required extra blending time.
• TRIEDEVERYTHING? If none of the preceding suggestions work, contact your
Blendtec service agent for further assistance.
INSTRUCTIONS THAT APPEAR IN THIS USER
GUIDE ARE NOT MEANT TO COVER EVERY
POSSIBLE CONDITION OR SITUATION THAT
MAY OCCUR. GOOD JUDGMENT MUST BE
USED WHEN OPERATING THIS OR ANY OTHER
MACHINERY.