Blichmann BeerGun User Manual

Blichmann Engineering, LLC 2016 BeerGun Owners Manual NEW-V1
For replacement parts visit blichmannengineering.com
1
BeerGun®
Bottle Filler
Assembly, Operation & Maintenance
Congratulations on your purchase, and thank you for selecting the BeerGun® bottle filler from Blichmann
Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer.
This manual will familiarize you with the assembly, operation, and maintenance of the BeerGun® bottle filler.
The patented BeerGun® is the lowest foaming and lowest oxygen pickup filler on the market achieving
dissolved oxygen levels as low as massive automated commercial bottle fillers! Rest assured that your beer will
stay as fresh as the big craft breweries beer!
IMPORTANT!!
**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION ****
Warning:
Sections labeled “Warning” can lead to serious injury or death if not followed. Please read
these thoroughly and understand them completely before use. If you do not understand
them or have any questions, contact your retailer or Blichmann Engineering™
(www.BlichmannEngineering.com) before use. Do NOT at ANY time operate the product
until you thoroughly read and understand these instructions!
Caution:
Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of
the equipment. Please read these sections thoroughly. If you have any questions, contact
your retailer or Blichmann Engineering™ (www.BlichmannEngineering.com) before use.
Important:
Sections labeled “Important” are critical to the proper performance and life of the product.
Assembly:
The BeerGun® comes fully assembled. However, prior to use it is recommended to disassemble for cleaning and
sanitizing.

Blichmann BeerGun Specifications

General

Brand	Blichmann
Model	BeerGun
Category	Water Filtration Systems
Language	English

Summary

Safety Information

General Safety Warnings

Read thoroughly and understand completely before use. Contact retailer or Blichmann Engineering if unsure.

Equipment Handling Cautions

Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance. Read thoroughly.

Critical Product Information

Sections labeled "Important" are critical for proper performance and product life.

Prior to Assembly / Disassembly

Parts Inventory and Cleaning Prep

Verify all parts are present and follow pre-use cleaning and sanitizing instructions.

Product Assembly Steps

Assembly Steps One through Five

Detailed instructions for connecting tubes, trigger, spring, valve seat, and beer clip.

Assembly Steps Six through Eight

Instructions for attaching hoses, CO2 connections, and regulator fittings.

Operation

Filling Bottles Safely

Techniques for filling bottles with minimal foaming and proper CO2 purging.

Tips for Successful Filling

Advice on pressure settings, purging, and bottle angle for optimal results.

Troubleshooting and Maintenance

Troubleshooting Common Issues

Solutions for foaming, loose parts, and addressing over-carbonation.

Post-Use Maintenance

Procedures for disassembling, cleaning, sanitizing, and storing the BeerGun after use.

Product Warranty Information

Limited Warranty Details

Covers manufacturing defects for one year; outlines exclusions and obligations.

Warranty Limitations and Liability

Discusses disclaimers for implied warranties, liability limits, and exclusions.

Legal and Compliance Notes

Addresses customer rights, local law consistency, and product material compliance.