BlindShell Classic 2 - Voice control

12
contains a group of characters. You can cycle through the group of characters by
pressing the respective button multiple times.
For example button two contains characters A, B, C, and number 2. To enter the
letter B – press the button twice. To enter the number 2 – press the button four times
or long press the button.
• Button one contains punctuation special characters.
• The asterisk button contains the rest of the special characters.
• Button zero contains the number 0 and space.
• The hash button changes the capitalization of the letters and switches between
numeric and alphanumeric keyboard entry.
• The long press of the hash button opens a menu with emojis. Press the conrm
button to input the selected emoji.
• To move in the text, press the down or up button. To select between moving by
character or by word, press the left action button.
Tip: The writing of a specic character can be nalized by pressing the down button.
This allows writing another character of the same button immediately (without waiting
for the click sound, which indicates that the character was entered).
Text input by voice dictation
While writing a message or other text input, voice dictation can be invoked by pressing
the side action button. After a beep tone, start dictating the text. After each dictated
segment, the phone slightly vibrates. At this moment, text dictation can be manually
nished by pressing the conrm button, back button, or the side action button. Voice
dictation nishes automatically if no text is dictated for a few seconds.
Time input
While entering time in applications such as Alarm, Calendar, or setting phone’s time,
use numeric keypad buttons to input four time digits. The rst pair of digits represents
hours and the second pair of digits represents minutes.
3.6 Voice control
The phone can be alternatively controlled by voice commands. To invoke voice control,
press the side action button. After a beep tone, start dictating the command. The
voice control has the following functionality:
12 12
12 12