BlindShell Classic 2 - Getting started; Package contents; Phone description

5
2 Getting started
2.1 Package contents
• BlindShell Classic 2 phone.
• Battery - a at rectangular object.
• Earphones - on one end of the earphones, there is a 3.5MM connector (jack), the
other end has two earbuds.
• USB wall charger - standard USB charger, input 100V~240V AC, 50/60Hz, output
4.7V-5.3V DC 0-2A.
• USB cable - a USB Type-C cable, with standard male USB Type-A on the other
end.
• Charging cradle - a stand for charging the phone. There is also a adhesive pad
that enables the cradle stick on a place.
• NFC tag (3x) - a sticker for object tagging. These tags can be read by a phone
application.
• Lanyard - a strap that can be attached to the phone. It comes with a little hook
that helps you to push the lanyard through the lanyard hole.
2.2 Phone description
Front side of the phone
The front side of the phone consists of the following parts. They are listed as they are
placed on the phone from top to bottom.
• Earpiece - line-shaped protrusion used as a speaker during a phone call.
• LCD screen - the smooth area of the phone used for displaying information.
• Keypad - buttons used for controlling the phone and inputting text.
• Microphone - placed in between the buttons of the keypad. Used for voice input.
• Loudspeaker - line-shaped notch used for voice and audio output.
Rear side of the phone
The rear side of the phone consists of the following functional parts. All of them are
located in the upper part of the rear side.
5 5
5 5