BlindShell Classic 2 - Page 40

40
• To connect to a WiFi network using the WPS button, select the WiFi network in
the Network list and then select Connect with the WPS push button. Then press
the WPS button on the router device.
• To connect to a hidden WiFi network, select the Connect to hidden network menu
item. Then enter the SSID (name) and password.
WiFi connection via text file
WiFi connection can be established using a text le stored in the phone’s internal
storage.
• Copy a text le named wi.txt to the root folder of the phone’s internal storage.
• Write the name of the WiFi network on the rst line of the le.
• Write the network password on the second line of the le.
• The password in the le will be automatically used when connecting to this specied
network.
Bluetooth
The Bluetooth menu item allows connecting and managing Bluetooth devices.
How to pair a new device
• Enable the pairing mode on the Bluetooth device. Some devices are in the pairing
mode by default when turned on and out of signal. Other devices have a special key
or combination of keys that will trigger the pairing mode. This is device-specic
and can be found in the manual of the device.
• Turn on Bluetooth and select the Scan for devices option. The scan may take up
to half a minute, then the nearby devices are listed.
• To pair a device, select the device in the list. Pairing may take a few seconds.
• Some devices may require entering a verication code. In this case, enter a code
provided by the BlindShell phone to the external Bluetooth device.
• To unpair a device, select the device in the Paired devices list and select Unpair
device.
Connecting and disconnecting a device
A newly paired device is usually connected automatically. To connect (or disconnect)
a device manually, select the device in the Paired devices list and select Connect device
(or Disconnect device).
40 40
40 40