Warning indicators
A warning lamp will light up to remind filter
cleaning after a program finishes.
If the filter cleaning warning lamp flashes,
please refer to Troubleshooting.
End of program
The End/Anticrease and Clean Filter warning
lamps on the program follow up indicator will
light up when the program ends. The door can
be opened and the dryer becomes ready for
another load.
Press the On/Off button to shut down the
dryer.
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has ended.
Clean the filter after each load!
At the end of the program, it is
recommended to press the On-Off button Off
before unloading the dryer.
To Next Page
Loading...
