Blomberg DWT25504SS - 2 Tools Which May be Needed; 3 Materials Which May be Needed

3
USA
2. TOOLS WHICH MAY BE NEEDED
3. MATERIALS WHICH MAY BE NEEDED
(Additional materials may be required to comply with local codes)
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided
dishwasher supply line.
Elbow with 3/4” N.P.T. female thread for dishwasher side, and sized to t
your water supply line (copper tubing/compression tting, or braided hose)
on the other side. Dishwasher connection is 3/4" male.
UL li󰀬ed conduit connector or 󰀬rain relief.
Teon tape or other pipe thread compound to seal plumbing connections.
Shut-o󰀨 valve and ttings appropriate for hot water supply line (copper
tubing/compression tting, or braided hose).
Silicone
Glue
Dishwasher Discharge Hose Adaptor