To Next PageTo Next PageWhy does my Blomberg WM 77110 NBL00 Washer keep spinning without stopping?
If your Blomberg washer is continuously spinning and the remaining time does not count down, the automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. Laundry should be rearranged and re-spun, if the laundry in the drum may be tangled up too much.
Why does my Blomberg Washer keep washing without counting down?
If your Blomberg washer is continuously washing and the remaining time does not count down, the washer will wait until there is a sufficient amount of water to avoid poor washing results due to lack of water and the selected temperature for the program is reached. The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. Laundry should be rearranged and re-spun, if the laundry in the drum may be tangled up too much.
Why is water immediately discharged from my Blomberg WM 77110 NBL00 Washer?
If the water being taken in is directly discharged in your Blomberg washer, connect the drain hose as described in the user manual.
What to do if my Blomberg WM 77110 NBL00 Washer does not drain water?
If your Blomberg washer isn't draining water or is draining slowly, start by checking the drain hose to ensure it is not folded. Also, the drain pump filter or the drain itself may be clogged. You can clean the drain pump filter. If the house drain pipes are clogged, call a plumber for assistance.
How to fix a soapy load in my Blomberg WM 77110 NBL00 Washer?
If your Blomberg washer load is still too soapy or the washer is full of suds at the end of the program, do not unload the washer. Operate a quick wash cycle (e.g. Delicates, Wools) without any detergent. Add 1-2 tablespoon of fabric softener into main wash compartment of detergent dispenser during water intake. Use proper amount of HE detergent next time you operate the washer.
Why does my Blomberg WM 77110 NBL00 cycle take so long?
If your Blomberg washer cycle time takes longer than expected, the water pressure, supply voltage, or inlet water temperature may be low. The washer will wait until there is a sufficient amount of water or will lengthen cycle time to heat up the water. Also, the automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. Reduce the amount of detergent next time you operate the washer, if number of rinse cycles might have increased to obtain a better rinse.
What to do if my Blomberg Washer is full of suds?
If your Blomberg washer is completely full of suds or suds are coming out of the dispenser during operation, push the “Start/Pause/Cancel” button. Mix 2 cups of water with 1-2 tablespoon of fabric softener and pour it into detergent dispenser. Push “Start/Pause/Cancel” button again. Use proper amount of HE detergent next time you operate the washer.
Why is my Blomberg Washer leaking from the bottom?
If you see water coming from the bottom of your Blomberg washer, check the inlet hose connections to ensure the strainers and rubber seals are solid and securely fitted. Also, make sure the end of the drain hose is tightly attached to the waste pipe or sink. If the house drain is clogged, call a plumber. Ensure the filter cap of the drain pump is tightly closed. Internal hose connections should be checked by a service technician.
Why is my Blomberg WM 77110 NBL00 Washer not filling with water?
If your Blomberg washer is not filling with water or washing after you've started the program, make sure the water faucets are fully open. Also, check that the water inlet hose isn't folded or clogged. Clean the water inlet strainers if necessary. Ensure the washer is plugged into a working outlet and that the drain hose isn't folded. If you're using handwash, wools, or soak cycle, wait for tumbling to start. Finally, ensure the door is properly closed.
How to prevent clothes from tangling in my Blomberg WM 77110 NBL00?
If your Blomberg washer clothes get tangled up too much in the drum when washing, do not load the washer in excess. Load the wash drum with items of different sizes, if you washing many items of the same type or size of clothes together.
Provides a visual overview of the washer's components.
Lists technical details like dimensions, weight, and power requirements.
Guides on choosing placement, clearances, and ventilation for installation.
Details on removing packaging, shipping bolts, and leveling the washer.
Instructions for electrical hookup, grounding, and water supply connections.
Guidance on drain hose setup and final installation checks.
Steps for moving the washer and guidelines for its disposal.
Steps for initial operation, sorting, and preparing laundry.
How to load the washer and use detergents and additives correctly.
Explanation of how the washer adjusts water usage for efficiency.
Overview of control panel buttons, display, and symbols.
Details on selecting programs, wash cycles, and special programs.
How to adjust wash temperature and spin speed for cycles.
Explanation of selectable options like Super Wash, Soak, and Extra Rinse.
Using time delay, changing settings, and canceling programs.
Steps for starting, pausing, adding laundry, and ending cycles.
How to activate/deactivate child lock to prevent tampering.
Steps to start, cancel, and add laundry to a wash cycle.
Procedures for discharging water without spinning or re-spinning.
Actions to take after the wash cycle has finished.
How to clean the detergent dispenser, door seal, and drum.
Instructions for cleaning water inlet strainers and the drain pump filter.
How to remove scale buildup using a descaling agent.
Solutions for issues with water not filling or draining properly.
Troubleshooting door issues, time delays, and unexpected stops.
Addressing extended cycle times, foam, and poor wash results.
Troubleshooting when the washer does not spin or loads are unbalanced.
Solutions for stains, discoloration, stiffness, and odors.
Diagnosing and resolving noises from the drum, drain pump, and vibration.
Troubleshooting blank screens and water cut-off symbols.
General