[14]
[35]
[35]
[16]
[33]
[37]
[16]
[37]
[37]
[32]
[37]
[15]
11
[14] x 1
12
[15] x 1
13
[16] x 1
[37] x 4
[35] x 2
[32] x 1
10
[12] x 1
[12] [12-1] [12-2] [12-3]
AA
1.5V
[12-1]
[12-2]
[12-3]
X 2
X 3
V
V
W
W1
W2W3
Lighting the appliance
1. If the appliance has a lid/hood, open it.
2. Ensure all knobs are in the off position.
Open the gas control valve on the gas bottle or regulator.
3. Push and turn the control knob to the high position.
Press the ignition button rapidly several times until the burner is lit.
4. If burner fails to ignite, turn control knob to the off position and
turn gas off at the bottle or regulator. Wait five minutes, then repeat
the above steps.
5. If the appliance still fails to light, plea
se refer to the manual igniti
on instr
uctions
.
6. After successful lighting, light each burner as desired.
To Next Page
Loading...
