Blooma Barker 450 User Manual

1 : 1
01 02
1
[33] x 12 (M6 x 38 mm)
[34] x 2 (M6 x 13 mm)
[36] x 4 (M4 x 10)
[37] x 4 (ST4.2 x10)
[35] x 2 (1/4”)
[38]
[39]
[28]
[28]
[27]
[24]
[38]
[29]
[24]
[23]
C
D
D
C
[38] [27] [25] [29][23]
[01] x 1 [02] x 1 [03] x 1 [04] x 1 [05] x 1 [06] x 1 [07] x 2 [08] x 1 [09] x 3 [10] x 1
[11] x 1 [12] x 1 [13] x 1 [14] x 1 [15] x 1 [16] x 1
[38] x 1
[18] x 1
[39] x 1 [40] x 1
[19] x 1 [20] x 1
[23] x 2 [24] x 2 [25] x 1 [26] x 6 [27] x 2 [28] x 2 [29] x 1 [30] x 1 [31] x 8 [32] x 2
[21] x 1(L) [22] x 1(R)[17] x 1
[02] x 1(L)
[03] x 1(R)
[04] x 1
[33] x 4
[31] x 4
[25] x 1
[27] x 2
[38] x 1
[39] x 1
[28] x 2
[29] x 1
[23] x 2
[24] x 2
G56201 Version 1 - 2013
You will need - Vous aurez besoin de - Potrzeba
- Вам потребуется - Necesitará - İhtiyacınız
olacak
Tools not provided - Éléments non fournis -
Narzędzia nie dołączone - Инструменты не
предоставляются - Herramientas no incluidas
- Aletler verilmez
Assembly - Assemblage - Montaż - Сборка -
Ensamblaje - Kurulum
Lighting the appliance
1. If the appliance has a lid/hood, open it.
2. Ensure all knobs are in the off position.
Open the gas control valve on the gas bottle or regulator.
3. Push and turn the control knob to the high position.
Press the ignition button rapidly several times until the burner is lit.
4. If burner fails to ignite, turn control knob to the off position and
turn gas off at the bottle or regulator. Wait five minutes, then repeat
the above steps.
5. If the appliance still fails to light, ple
a
se refer to the manual ignition instr
uctions
.
6. After successful lighting, light each burner as desired.
KHK-IMP PID 63932 C6
Barcode: 5052931266753 / 5052931254170
Code barre: 5052931249497 (Réf 641669)
Barcode: 2140002643640 (Ref 2000019847)
GB IE
FR
TR
Barker 450
Bondi G450
GB IE
IMPORTANT - Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp
edges are present.
FR
IMPORTANT - malgré tout le soin apporté dans la fabrication de ce produit, il convient d’opérer avec précaution à cause de la
présence possible d’arêtes coupantes.
PL
Ważne - choć podczas produkcji urządzenia dołożono wszelkiej staranności, podczas montażu należy uważać na możliwe ostre
krawędzie.
RU
Важно - В то время как при изготовлении предпринимаются все меры безопасности, во время сборки также нужно быть
аккуратным, если есть острые углы.
ES
Importante - Si bien durante la fabricación de este producto se toman todas las medidas de cuidado necesarias, se debe tener
TR
Önemli - Bu ürünün üretimi sırasında her türlü önlem alınmış olmasına rağmen, montaj sırasında keskin kenarlara karşı dikkatli
olunmalıdır.
G56201-BBQ-Blooma-IM-A2-06.indd 1 11/5/13 10:38 AM
[02]
[03]
[04]
B
B
B
A
A
A
[33][31]

Blooma Barker 450 Specifications

General

Brand	Blooma
Model	Barker 450
Category	Grill
Language	English

Summary

Assembly Instructions and Parts Identification

Safety Warnings

Important safety precautions regarding sharp edges during assembly and handling of the product.

Parts List Overview

Identification and quantities of all components required for assembling the barbecue.

Step-by-Step Assembly Guide

Step 03: Wheel and Frame Assembly

Instructions for attaching wheels and assembling the main frame of the barbecue unit.

Step 04: Main Body and Lid Attachment

Guidance on connecting the main barbecue body and attaching the lid.

Step 06: Side Shelf and Burner Tray

Details on how to install the side shelves and the burner tray assembly.

Step 07: Grate and Heat Plate Placement

Instructions for correctly positioning the cooking grates and heat plates.

Step 08: Internal Component Arrangement

Guidance on placing internal components such as the warming rack and grease tray.

Step 09: Gas Connection and Burner Setup

Instructions for connecting gas components and assembling the burners.

Step 10: Drip Pan and Base Plate

Steps for attaching the drip pan and the base plate to the barbecue structure.

Step 11: Final Assembly Check

Final checks and placement of the assembled barbecue unit.

Step 12: Component Confirmation

Identification of key components used in the final assembly stages for verification.

Step 13: Grate and Warming Rack Installation

Instructions for installing the main cooking grates and the warming rack.

Step 14: Ignition System Installation

Guidance on installing the battery and igniter system for the barbecue.

Step 15: Side Burner Installation

Instructions for assembling and installing the side burner unit.

Step 16: Bottom Shelf and Supports

Steps for attaching the bottom shelf and support structures.

Step 17: Final Component Attachment

Instructions for attaching final components like handles or doors.

Step 18: Lid Handle and Accessory Mounts

Guidance on installing the lid handle and accessory mounting points.

Step 19: Gas Leak Test and Safety Check

Mandatory gas leak test and safety verification before first use.

Operation and Safety Notes

Post-Assembly Safety Instructions

Important notes on retaining information, careful reading, and safe storage.