Blue Clean 7830 - Machine Start up

AR BLUE CLEAN 7830 - 7850 - 7870
USE AND MAINTENANCE HANDBOOK page 9
8. MACHINE START-UP
After having installed the machine, in order to operate it, open the water supply faucet
H fig.6.
The control panel has been designed to run the operations easily. The knob A has
three main functions:
Pos.1
OFF indicates that the
machine is turned off.
Pos.2
The second position
indicates that the
motor pump is on.
Pos.3
The third position
ON indicates that
the boiler is on.
IMPORTANT! Make sure the pressure never exceeds
the pressure indicated on the pump plate.
The hydraulic system is equipped with a safety valve that works whenever the
pressures is higher than the calibration.
A
A
1
2
3
B
Fig.7