Blueant X6 - Page 7

Get to know your X6 - Top of speaker 1
. Mode (M) Button Bluetooth Mode
If you want to change to a different The X6 announces Bluetooth mode and goes
mode, simply press the Mode (M) into Bluetooth pairing or searches for a paired
button. The order of modes is below phone. The display has the word Blue flashing
1. Bluetooth to signify the X6 needs to be paired to a phone.
2.UsB Search for and pair the “BlueAnt X6”.
3.SD Card Once paired and connected to your phone, music
4. AUX tracks can be controlled on the speaker using the
X6 buttons or from the phone. The volume controls
on the speaker are synced to the phone volume.
USB Mode SD Card Mode AUX Input Mode
When you press mode button, the X6 willgo ~ When you press mode button again, you willgo ~ When you press the mode button again you will go to
to USB mode and announce “USB playback”. to Micro SD card mode and the X6 will AUX in mode and the X6 will announce “Auxiliary Input”.
The display will show USB. The X6 announce “SD card playback”. The display The display will show “Line”.
supports FAT32 formatted USB devices will show “Card”. The X6 supports FAT32 Select this mode to playback from an external source
upto 32GB. File formats supported formatted Micro SD cards upto 32GB. File via 3.5mm input. In this mode skip forward, back, play
are: MP3, WAV, FLAC, WMA. formats supported are: MP3, WAV, FLAC, WMA. and laop buttons do not do anything and music must
be controlled by the external source device.
The X6 volume control can only control speaker volume
To
return
to
Bluetooth
mode,
simply
press
th
and
not the
volume
of
the
source
device.
Mode button again.
4